Skip to content
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)
8"x8' North Carolina DOT Line Stencil

8"x8' North Carolina DOT Line Stencil

$53.00
SKU 108-5NC05

8"x8' North Carolina DOT Line Stencil SKU: 5NC05

A 8 inch x 8 feet North Carolina DOT line stencil is perfect for painting those wide lines that a striping machine cannot get into or if a person is using a roller or aerosol can. This 8" x 8' can also be used to paint a railroad X at a railroad crossing. A person can paint up to 5 lines with this stencil before it needs to be set aside to dry and then cleaned before it is ready for more use. This 8 inch by 8 feet North Carolina DOT Handicap is made specifically to meet the specifications for the Department of Transportation's Manual on Uniform Traffic Control Devices or MUTCD. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

(North Carolina DOT Specifications (1205.01/Sheet 1)

Other North Carolina Stencils

Specifications

Material Width 20"
Material Length 108"
Line Width 8"
Line Length 96" (8')
Availability Usually Ships in 1-2 days or sooner*








Country of origin: USA

Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

Other Part Numbers

108-5NC05 116-5NC05 080-5NC05 025-5NC05

Old Part Numbers

4623-096 5623-096 6623-096 7623-096


Selecting a Stencil Grade:

  • 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
  • 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
  • 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
  • 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.

Related products