Home » 18" North Carolina DOT Triangle Shark Teeth Highway Stencil
1-800-Stencil

18" North Carolina DOT Triangle Shark Teeth Highway Stencil

In stock
SKU: 108-5NC18
$24.00

18" North Carolina DOT Triangle Shark Teeth Highway Stencil SKU: 1800-5NC18

The 18 inch North Carolina DOT Triangle Shark Teeth Highway Stencil is perfect for use on roads or highways to indicate yielding or to show pedestrian traffic ahead. This stencil has a standard 3 inch overspray to ensure clean markings. It is very easy to clean and reuse, so don't worry about having to buy a new one every painting job you have. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

(North Carolina DOT Specifications (1205.08/Sheet 2)

Other North Carolina Stencils

      Specifications

      Stencil Width 12" each triangle
      Stencil Height 18"
      Material Width 20"
      Material Height 24"
      Triangle Width
      		 12"
      Overspray 4"
      Availability In Stock - Ships Same Day*


      Country of origin: USA

           Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

            Other Part Numbers

           116-5NC18 108-5NC18 080-5NC18 025-5NC18

       

       

      Selecting a Stencil Grade:

      ·         1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.

      ·         1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.

      ·         5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.

      ·         1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.