Skip to content
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)
24" North Carolina DOT Bike Lane w/ Dashes Stencil

24" North Carolina DOT Bike Lane w/ Dashes Stencil

$58.00
SKU 108-5NC25

24" North Carolina DOT Bike Lane w/ Dashes Stencil SKU: 1800-5NC25

This 24 inch North Carolina DOT Bike lane stencil with 2 inch dashes is optimal for designating areas that are reserved for bikers. It is visible considering the size and the space it takes for people to see and concede the lanes to bikers. This 24 inch North Carolina DOT Handicap is made specifically to meet the specifications for the Department of Transportation's Manual on Uniform Traffic Control Devices or MUTCD. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

(North Carolina DOT Specifications (1205.08/Sheet 3)

Other North Carolina Stencils

Specifications

Dash stroke 2"
Character Height 24"
Character Width 10"
Material Width 23"
Material Height 52"
Availability In Stock - Ships Same Day*



Country of origin: USA

Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

Other Part Numbers

116-5NC25 108-5NC25 080-5NC25 025-5NC25


 

Selecting a Stencil Grade:

  • 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
  • 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
  • 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
  • 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.

Related products