Home » 96" North Dakota DOT SCHOOL Stencil
1-800-Stencil

96" North Dakota DOT SCHOOL Stencil

In stock
SKU: 108-5ND09
$594.00

96" North Dakota DOT SCHOOL Stencil SKU: 1800-5ND08

This 96" North Dakota DOT SCHOOL Stencil is the number one seller for all of the 96" wording stencils. Typically used on roadways or large parking lots, this stencil is designed to be viewed at moderate to high speed. This marking can be used directly in front of a stop line, many hundreds of feet away as a "SCHOOL ZONE", or as a warning anywhere in between. The stencil is made specifically to meet the specifications for the Department of Transportation's Manual on Uniform Traffic Control Devices or MUTCD. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

(North Dakota DOT Specifications (D-762-1)

Other North Dakota Stencils

Specifications

Stencil Width 116"
Stencil Height 96"
Material Width 6 pieces, each 20" wide
Material Height 102"
Availability In Stock - Ships Same Day*
Stroke Width 4"
Number of pieces 4
Typical Usage Roadway
Designed For State FHWA - MUTCD Specs



Country of origin: USA

     Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

      Other Part Numbers

     116-5ND08 108-5ND08 080-5ND08 025-5ND08

 

 

Selecting a Stencil Grade:

·         1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.

·         1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.

·         5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.

·         1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.