Home » 96" Oregon DOT Turn Arrow Stencil
1-800-Stencil

96" Oregon DOT Turn Arrow Stencil

In stock
SKU: 108-5OR06
$348.44

96" Oregon DOT Turn Arrow Stencil SKU: 5OR06

This 96" Oregon DOT Turn arrow is the Standard arrow that is called out by Oregon's DOT Design Specs. It is designed to be typically used in Highway to regulate traffic. Please note that this is different than the arrow that is used in the parking lot. This 96 inch Oregon DOT Turn Arrow is made specifically to meet the specifications for the Department of Transportation's Manual on Uniform Traffic Control Devices or MUTCD. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.


Other Oregon Stencils

Specifications

Tail Stroke 12"
Stencil Width 72"
Stencil Height 96"

Material Height (arrow turn tail)

77"
Material Width (arrow head) 43"
Material Height (arrow head) 80"
Material Width (arrow turn tail) 48"
Availability

In Stock - Ships Same Day*





Country of origin: USA

Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

Other Part Numbers

108-5OR06 116-5OR06 080-5OR06  025-5OR06


Selecting a Stencil Grade:

  • 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
  • 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
  • 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
  • 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.