Home » 4"x8' Oregon DOT Line Stencil
1-800-Stencil

4"x8' Oregon DOT Line Stencil

In stock
SKU: 108-5OR01
$40.00

4"x8' Oregon DOT Line Stencil SKU: 5OR01

The 4 inch by 8 feet Oregon DOT line stencil needs to be apart of every striping outfit because when you cannot get a striping machine into an area and don't want to tape off an area to paint, this is the perfect line stencil for you. A person can paint up to 5 lines with this stencil before it needs to be set aside to dry and then cleaned before it is ready for more use. This 4 inch x 8 feet Oregon DOT line stencil is made specifically to meet the specifications for the Department of Transportation's Manual on Uniform Traffic Control Devices or MUTCD. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.


Other Oregon Stencils

Specifications

Material Width 12"
Material Length 108"
Line Length 96" (8')
Line width 4"

Availability

In Stock - Ships Same Day*




Country of origin: USA

Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

Other Part Numbers

108-5OR0 116-5OR01 080-5OR01 025-5OR01

Selecting a Stencil Grade:

  • 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
  • 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
  • 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
  • 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.