Home » 18" Missouri DOT Triangle Shark Teeth Highway Stencil
1-800-Stencil

18" Missouri DOT Triangle Shark Teeth Highway Stencil

In stock
SKU: 108-5MO09
$113.34

18" Missouri DOT Triangle Shark Teeth Highway Stencil SKU: 1800-5MO09

The 18 inch Missouri DOT Triangle Shark Teeth Highway Stencil is perfect for use on roads or highways to indicate yielding or to show pedestrian traffic ahead. This stencil has a standard 3 inch overspray to ensure clean markings. It is very easy to clean and reuse, so don't worry about having to buy a new one every painting job you have. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

(Missouri DOT Specifications (Sheet 6, 620.00N)

Other Missouri Stencils

Specifications

Stencil Width 12" each triangle
Stencil Height 18"
Material Width 78"
Material Height 24"
Triangle Width
 12"
Space Between Triangles 3"
Availability In Stock - Ships Same Day*


Country of origin: USA

     Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

      Other Part Numbers

     116-5MO09 108-5MO09 080-5MO09 025-5MO09

 

 

Selecting a Stencil Grade:

·         1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.

·         1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.

·         5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.

·         1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.