Skip to content
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)

CHARGING STATION Stencil - (4"-12")

SKU 108-90433

CHARGING STATION Stencil - (4"-12")

The CHARGING STATION - (4"-12") stencil is great for marking stations strictly for charging vehicles. It's thick font and concise wording makes it easy to read and identify. It comes with different sizes so you can paint it on different areas. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

  • Optimal for labeling areas/spaces reserved for charging vehicles
  • Create high visibility markings with ease
  • Substantial and Eco-friendly
  • Offered with different styles, thicknesses and stencil grade materials

Sizes available: 

  • 4 inch Charging Station - (9"x21")
  • 6 inch Charging Station - (14"x32")
  • 8 inch Charging Station - (18"x40")
  • 10 inch Charging Station - (22"x46")
  • 12 inch Charging Station - (27"x64")


Stencil Width 21"-27"
Stencil Height 9"-27"
Material Width 28"-72"
Material Height 16"-35"
Availability Usually Ships in 1-2 days or sooner*












Country of origin: USA

Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

Other Part Numbers








Selecting a Stencil Grade:

  • 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
  • 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
  • 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
  • 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.