96" STOP Stencil

In stock
SKU: 5121-096
Regular price $391.00

96" STOP Stencil SKU: 0121-096

This 96 inch STOP stencil is the number one seller for all of the 96" wording stencils. Typically used on roadways or large parking lots, this stencil is designed to be viewed at moderate to high speed. This marking can be used directly in front of a stop line, many hundreds of feet away as a "STOP AHEAD", or as a warning anywhere in between. The stencil meets the FHWA's MUTCD specs (manual for uniform traffic control devices) and is compliant for most State DOT's. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

  • 4 piece kit can be spaced to match existing marking
  • Easy to use and store
  • Meets most state DOT specs
  • Meets Federal MUTCD specs
  • Elongated design for high speed viewing

Specifications

Stencil Width 76" Typical, can be adjusted as needed
Stencil Height 96"
Material Width 4 pieces, each 24" wide
Material Height 104"
Availability In Stock - Ships Same Day*
Stroke Width 4"
Number of pieces 4
Typical Usage Roadway
Designed For FHWA - MUTCD Specs

 


Country of origin: USA

Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

Other Part Numbers

4121-096 5121-096 6121-096 7121-096


 

Selecting a Stencil Grade:

  • 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
  • 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
  • 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
  • 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.