Skip to content
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)

41" Alaska DOT Handicap Stencil w/ Background

$98.00
SKU 108-5AK08

41" Alaska DOT Handicap Stencil with Background SKU: 1800-5AK08

The 41 inch Alaska DOT Handicap Stencil is a large handicap with a 64" background that meets ADA (Americans with Disabilities Act) standards and some state/ local standards. This 52" Handicap Stencil is good for small handicap marking areas when it meets the state and local standards. This 41 inch Alaska DOT Handicap is made specifically to meet the specifications for the Department of Transportation's Manual on Uniform Traffic Control Devices or MUTCD. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

Specifications

ADA Compliant Yes
Number of pieces 3
Has Background Yes
Stroke 0.3'
Border Width 63"
Border Height 64"
Stencil Width 36"
Stencil Height 41"
Material Width 47"
Material Height 41"
Availability In Stock - Ships Same Day*



Country of origin: USA

Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

Other Part Numbers

108-5AK08 116-5AK08 080-5AK08 025-5AK08

 

Selecting a Stencil Grade:

  • 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
  • 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
  • 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
  • 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.