Home » 39" Michigan DOT Handicap Stencil
1-800-Stencil

39" Michigan DOT Handicap Stencil

In stock
SKU: 108-5MI34
$165.00

39" Michigan DOT Handicap Stencil SKU: 1800-5MI34

This 39 inch Michigan DOT Handicap stencil is made specifically to meet the specifications for the Department of Transportation's Manual on Uniform Traffic Control Devices or MUTCD. The snipped toe on this stencil makes it very discernable from other handicap stencils. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

(Michigan DOT Specifications ()

Other Michigan Stencils


      Specifications

      ADA Compliant Yes
      Has Border Yes
      State Spec Massachusetts
      Typical Usage Parking Lot
      Stencil Width 32"
      Stencil Height 39"
      Material Width 55"
      Material Height 58"
      Border Width 47"
      Border Height 50"
      Availability Usually Ships in 1-2 days or sooner*

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

      Country of origin: USA

      Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

      Other Part Numbers

      116-5MI34 108-5MI34 080-5MI34 025-5MI34

       

      Selecting a Stencil Grade:

      • 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
      • 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
      • 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
      • 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.