Skip to content
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)

38.25" Alabama DOT Handicap Stencil

SKU 108-5AL04

38.25" Alabama DOT Handicap Stencil SKU: 5AL04

This 38.25 inch Alabama DOT Handicap stencil is designed to match the standard plans for ALDOT provided on page TCM-703 of the Alabama Department of Transportation Pavement Legends and Markings Details. The snipped toe on this stencil makes it very discernable from other handicap stencils. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.


Other Alabama Stencils 

228" Alabama DOT Lane Drop Arrow Stencil- 5AL05
177" Alabama DOT Combo Arrow Stencil- 5AL07
153" Alabama DOT Combo Arrow Stencil- 5AL06
36" Alabama DOT Yield Line Stencil- 5AL02


ADA Compliant Yes
Has Background Handicap Symbol Only
State Spec Alabama
Typical Usage Parking Lot
Stencil Width 33.5"
Stencil Height 38.25"
Material Width 39"
Material Height 45"
Availability Usually Ships in 1-2 days or sooner*













Country of origin: USA

Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

Other Part Numbers

116-5AL04 108-5AL04 080-5AL04 025-5AL04

Old Part Numbers
4315-038 5315-038 6315-038 7315-038


Selecting a Stencil Grade:

  • 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
  • 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
  • 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
  • 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.