120" Utah DOT SCHOOL Stencil

In stock
SKU: 108-5UT02W
Regular price $1,560.00

120" Utah DOT SCHOOL Stencil SKU: 1800-5UT02W

This 120 inch Utah DOT SCHOOL Stencil is the number one seller for all of the 120" Utah wording stencils. Typically used on roadways or large parking lots, this stencil is designed to be viewed at moderate to high speed. This marking can be used as a warning anywhere in between. The stencil is made specifically to meet the specifications for the Department of Transportation's Manual on Uniform Traffic Control Devices or MUTCD. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

(Utah DOT Specifications (ST 2)

Other Utah Stencils

      Specifications

      Stencil Width 232"
      Stencil Height 120"
      Material Width 12 pieces, each 40" wide
      Material Height 134"
      Availability In Stock - Ships Same Day*
      Stroke Width 8"
      Number of pieces 12
      Typical Usage Roadway
      Designed For State FHWA - MUTCD Specs

       


      Country of origin: USA

           Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

            Other Part Numbers

           116-5UT02W 108-5UT02W 080-5UT02W 025-5UT02W

       

       

      Selecting a Stencil Grade:

      ·         1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.

      ·         1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.

      ·         5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.

      ·         1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.