100" Montana DOT TURN Stencil

In stock
SKU: 108-5MT09
Regular price $416.00

100" Montana DOT TURN Stencil SKU: 1800-5MT09

This 100" Montana DOT TURN Stencil is the number one seller for all of the 100" wording stencils. Typically used on roadways or large parking lots, this stencil is designed to be viewed at moderate to high speed. This marking can be used as a warning anywhere in between. The stencil is made specifically to meet the specifications for the Department of Transportation's Manual on Uniform Traffic Control Devices or MUTCD. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

(Missouri DOT Specification (620-10)

Other Missouri Stencils

      Specifications

      Stencil Width 76"
      Stencil Height 100"
      Material Width 4 pieces, each 20" wide
      Material Height 107"
      Availability In Stock - Ships Same Day*
      Stroke Width 4"
      Number of pieces 4
      Typical Usage Roadway
      Designed For State FHWA - MUTCD Specs

       


      Country of origin: USA

           Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

            Other Part Numbers

           108-5MT09 116-5MT09 080-5MT09 025-5MT09

       

       

      Selecting a Stencil Grade:

      ·         1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.

      ·         1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.

      ·         5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.

      ·         1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.