100" Mississippi DOT TURN Stencil

100" Mississippi DOT TURN Stencil SKU: 1800-5MS06

This 100" Mississippi DOT TURN Stencil is the number one seller for all of the 100" wording stencils. Typically used on roadways or large parking lots, this stencil is designed to be viewed at moderate to high speed. This marking can be used directly in front of a stop line, or as a warning anywhere in between. The stencil is made specifically to meet the specifications for the Department of Transportation's Manual on Uniform Traffic Control Devices or MUTCD. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional HDPE plastic to all last for years of professional use.

(Mississippi DOT Specification (PM-5, 6055)

Other Mississippi Stencils

• 100" Mississippi DOT STOP Stencil - 5MS01
• 100" Mississippi DOT AHEAD Stencil - 5MS02
• 100" Mississippi DOT SCHOOL Stencil - 5MS03
• 100" Mississippi DOT LANE Stencil - 5MS04
• 100" Mississippi DOT RIGHT Stencil - 5MS05
• 100" Mississippi DOT LEFT Stencil - 5MS07
• 100" Mississippi DOT YIELD Stencil - 5MS08
• 100" Mississippi DOT EXIT Stencil - 5MS09
• 100" Mississippi DOT SIGNAL Stencil - 5MS10
• 100" Mississippi DOT ONLY Stencil - 5MS11
• 100" Mississippi DOT Turn Arrow Stencil - 5MS12
• 120" Mississippi DOT Straight Arrow Stencil - 5MS13
• 36" Mississippi DOT Triangle Shark Teeth Stencil - 5MS14
• 212" Mississippi DOT Lane Drop Arrow Stencil - 5MS15
• 240" Mississippi DOT Wrong Way Arrow Stencil - 5MS16
• 153" Mississippi DOT Combo Arrow Stencil - 5MS17
• 240" Mississippi DOT Railroad Crossing kit Stencil - 5MS18

Specifications

Country of origin: USA

     Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

      Other Part Numbers

     116-5MS06 108-5MS06 080-5MS06 025-5MS06

Selecting a Stencil Grade:

·         1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.

·         1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.

·         5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.

·         1/4” (.025”) HDPE – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. This rigid High-Density Polyethylene material delivers exceptional stiffness to prevent sagging on large stencils, ensuring crisp, professional results even under repeated use.