Skip to content
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)

10" 2 Digit Number Stencil Kit 00-99

SKU 5382-010

10" 2 Digit Number Kit 00-99 SKU: 0382-010

When performing a large numbering project, this 10 inch 2 digit number kit is an extremely useful asset. Rather than having to paint your individual number stencils hundreds of times, you only have to paint one stencil for every hundred numbers. Contractors have reported back to us that they can't even imagine having to go back after purchasing one of these kits. Most of the time users report paying for the kit on its first use. Our 10" 2 digit number kit is designed with 2" of over-spray on all sides , we can customize the kit to have 3" over-spray for an additional fee if you would like. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.


Number of pieces
Stencil Width Varies (see images)
Stencil Height 10"
Material Width Varies (see images)
Material Height 14"
Availability Usually Ships in 1-2 days or sooner*

Country of origin: USA

Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

Other Part Numbers

4382-010 5382-010 6382-010 7382-010



Selecting a Stencil Grade:

  • 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
  • 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
  • 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
  • 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.