Skip to content
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)

96" SCHOOL Stencil

$586.00
SKU 5112-096

96" SCHOOL Stencil SKU: 0112-096

This 96 inch STOP stencil is typically used on roadways or large parking lots, this stencil is designed to be viewed at moderate to high speed. This marking can be used directly in front of a School Zone, many hundreds of feet away as a "SCHOOL ZONE AHEAD", or as a warning anywhere in between. The stencil meets the FHWA's MUTCD specs (manual for uniform traffic control devices) and is compliant for most State DOT's. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

  • Easy to see at high speeds
  • Meets Federal MUTCD specs
  • Stencil comes in 6 pieces
  • Easy to store

Specifications

Stencil Width 116" Typical, can be adjusted as needed
Stencil Height 96"
Material Width 6 pieces, each 24" wide
Material Height 104"
Availability Usually Ships in 1-2 days or sooner*

 

 

Country of origin: USA

Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

Other Part Numbers

4112-096 5112-096 6112-096 7112-096


 

Selecting a Stencil Grade:

  • 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
  • 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
  • 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
  • 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.