96" Dallas DOT Number Kit Stencil
96" Dallas DOT Number Kit Stencil - SKU: 1800-5DAL05
The 96" Dallas DOT Number Kit stencil is a great set to have if you paint a great deal of 96" numbers, or you like to be prepared on the job site. This set is made specifically to meet the specifications for the Department of Transportation's Manual on Uniform Traffic Control Devices or MUTCD. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.
(Dallas DOT Specifications (PM (SHIELD)-06 (DAL))
Other Dallas Stencils
- 96" Dallas DOT WEST Stencil - 5DAL01
- 96" Dallas DOT EAST Stencil - 5DAL02
- 96" Dallas DOT NORTH Stencil - 5DAL03
- 96" Dallas DOT SOUTH Stencil - 5DAL04
- 96" Dallas DOT 45 Interstate Shield Stencil - 5DAL06
- 96" Dallas DOT 577 Stencil - 5DAL07
- 96" Dallas DOT 408 Stencil - 5DAL08
- 48" Dallas DOT LOOP Stencil - 5DAL09
- 48" Dallas DOT SPUR Stencil - 5DAL10
- 48" Dallas DOT TEXAS Stencil - 5DAL11
- 48" Dallas DOT FM Stencil - 5DAL12
Specifications
Stencil Width | Individual numbers are 16" |
Stencil Height | 96" |
Material Width | Individual numbers are 20" |
Material Height | 104" |
Availability | 5 Days |
Country of origin: USA
Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.
Other Part Numbers
108-5DAL05 116-5DAL05 080-5DAL05 025-5DAL05
Selecting a Stencil Grade:
- 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
- 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
- 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
- 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.