12" AHEAD Stencil
12" AHEAD Stencil SKU: 0002-012
Typically used in conjunction with a STOP stencil, or PED X-ING, this 12 inch AHEAD stencil is very handy to have. The 12" font is typically used in lower speed applications such as: bike lanes, parking lots, drive throughs, and walkways. If traffic is estimated to be over 10 mph, consider using an 18" or 24" AHEAD stencil. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.
- 12" Tall lettering is perfect for areas with low speed travel
- Full 3 inches of over-spray plastic
- CNC cut for high precision
Specifications
| Stencil Width | 52" |
| Stencil Height | 12" |
| Material Width | 58" |
| Material Height | 18" |
| Availability | In Stock - Ships Same Day* |
| Stroke Width | 2" |
| Number of pieces | 1 |
| Is reuseable? |
Yes, hundreds of times |
| Typical Usage | Parking Lot |
Country of origin: USA
Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.
Other Part Numbers
4002-012 5002-012 6002-012 7002-012
Selecting a Stencil Grade:
- 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
- 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
- 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
- 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.
