3" Number Kit for Curbs Stencil
3" Number Kit for Curbs Stencil SKU: 0380-C03/0381-C03
These 3 inch Number stencils are specifically designed to be used on vertical curb faces. The 3 inch tall number is offset from the bottom of the stencil by 1.5", this allows you to perfectly space these 3" numbers on a typical 6" tall curb. We have designed these stencils to include 5.5" of plastic on top in order to make them easier to hold against the curb with one hand while spraying with the other. These 3" Curb Style Number stencils can also be used flat on the ground, they just have less overspray room then the standard set. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.
Specifications
| Character Height | 3" |
| Character Width | 2.2" - 2.3" |
| Numbers Included | 0-9 |
| Additional Items | 2 blank / end pieces |
| Material Width | 4" |
| Material Height | 10 |
| Availability | In Stock - Ships Same Day* |
Country of origin: USA
Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.
Other Part Numbers
4380-C03 5380-C03 6380-C03 7380-C03
4381-C03 5381-C03 6381-C03 7381-C03
Selecting a Stencil Grade:
- 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
- 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
- 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
- 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.
