Skip to content
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)

111" FHWA/DOT SHARED BIKE LANE Stencil "Sharrow"

$183.00
SKU 5350-111

111" FHWA/DOT SHARED BIKE LANE Stencil "Sharrow" SKU: 0350-111 

"Sharrows" have become a major part of some cityscapes. Built to the same quality standards as all of our stencils, this Shared Bike Lane Arrow or "Sharrow" stencil will perform perfectly for you. Our in-house designer is very thorough and placed the bridging for this complicated stencil in strategic areas to make it as easy to use as possible.  According to the US Manual on Uniform Traffic Control Devices (MUTCD), shared-lane markings are used to: Assist bicyclists with lateral positioning in a shared lane with on-street parallel parking in order to reduce the chance of a bicyclist impacting the open door of a parked vehicle; Assist bicyclists with lateral positioning in lanes that are too narrow for a motor vehicle and a bicycle to travel side by side within the same traffic lane; Alert motorists of the lateral location bicyclists are likely to occupy within the traveled way; Encourage safe passing of bicyclists by motorists; and Reduce the incidence of wrong-way bicycling. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

  • 2 styles available
  • 1 piece, easy to use
  • MUTCD style

Specifications

Stencil Width 39"
Stencil Height 111"
Material Width 48"
Material Height 120"
Availability In Stock - Ships Same Day*

 

 

Country of origin: USA

Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

Other Part Numbers

4350-111  5350-111  6350-111  7350-111 

 

 

Selecting a Stencil Grade:

  • 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
  • 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
  • 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
  • 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.