Home » All Handicap and ADA Paint Stencils » 41" Washington DOT Handicap with border Stencil
1-800-Stencil

41" Washington DOT Handicap with border Stencil

In stock
SKU: 108-5WA16
$312.00

41" Washington DOT Handicap with border Stencil SKU: 1800-5WA16

This 41 inch Washington DOT Handicap with border stencil is made specifically to meet the specifications for the Department of Transportation's Manual on Uniform Traffic Control Devices or MUTCD. The snipped toe on this stencil makes it very discernable from other handicap stencils. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

(Washington DOT Specifications (M-24.60-04)

Other Washington Stencils

    Specifications

    ADA Compliant Yes
    Has Background Handicap Symbol Only
    State Spec Washington
    Typical Usage Parking Lot
    Stencil Width 36"
    Stencil Height 41"
    Border Height 64"
    Border Width 64"
    Material Width 80"
    Material Height 80"
    Availability Usually Ships in 1-2 days or sooner*

     

     

     

     

     

     

     

     

     

     

     

     

    Country of origin: USA

    Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

    Other Part Numbers

    116-5WA16 108-5WA16 080-5WA16 025-5WA16

     

    Selecting a Stencil Grade:

    • 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
    • 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
    • 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
    • 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.