12" Number Kit Stencil
12" Number Kit Stencil SKU: 0380-012/0381-012
As one of our best selling products, these 12 inch numbers are ideal for numbering parking spaces. 12" numbers are very visible, while not taking up too much room in a standard 9' parking space. Designed specifically with contractors in mind, our 12" number stencil kit has a 1" border on the sides in order to keep spacing uniform. Why does this matter? Well, most of the time you will just be painting the stall number, but commonly enough you will paint "RESERVED" and a number. If the stencils had a non-uniform spacing like most kits out there it could make for a less than perfect look, and nobody likes that! All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.
- Perfect for numbering parking spaces
- 2 inches of overspray on top and bottom
- Industry standard 12-inch height
- Create high visibility markings with ease
- Pieces butt together for perfect 2-inch spacing
Specifications
| Character Height | 12" |
| Character Width | 9" |
| Numbers Included | 0-9 |
| Number of pieces | 12-18 |
| Additional Items | 2/ea Blank/end pieces |
| Material Width | 11" |
| Material Height | 16" |
| Availability | In Stock - Ships Same Day* |
Country of origin: USA
Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.
Other Part Numbers
4380-012 5380-012 6380-012 7380-012
4381-012 5381-012 6381-012 7381-012
Selecting a Stencil Grade:
- 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
- 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
- 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
- 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.
